Touch-Down Grab

Mechancial Single-Rope | On-the-hook solution | touch-down lock mechanism | for single drum cranes

MCSR Grab

  • - Mechanical
  • - Single-Rope (single drum crane)
  • - On-The-Hook solution
  • - Touch-Down required to Open/Close the grab
  • - No additional equipment needed
  • - Shock-absorbing cylinder
  • - Less maintenance work
  • - Easy to operate


Description

The Single Rope Grab, also called Touch-Down Grab, is especially designed for cranes with a single cable drum. Also most vessel cranes have single drum cranes, that cannot operate 2- or 4-Rope Grabs. In such case this grab will be a practical On-The-Hook solution. A mechanism on the grab, locks/unlocks the grab to open or close each time it touches the ground. This system is mostly preferred, if there is only one cable available.


A step by step description of a touch-down mechanism:

  1. Grab is lowered at open position.
  2. After grab touches down on the material, the rope from the crane is released until lose. The mechanism is locked now.
  3. The grab is pulled up and will close (buckets or tines), filling up with material.
  4. The loaded grab is taken to destination.
  5. At unloading destination (in this case, a hopper), the grab will be lowered to touch-down again until crane rope is loose again. The mechanism is unlocked now.
  6. When lifted, the material will spill out as the grab opens.
  7. The grab is empty.
  8. The grab is taken to loading destination.
RC Grab